Description
The SRB4412 Brushed Stainless Steel Heated Towel Rail is an affordable luxury for every bathroom. This 600×800 7-bar ladder rail features a brushed stainless steel finish that complements brushed nickel tapware perfectly. Operating at a safe 12-volt with a supplied transformer, it rapidly heats to 45–55°C and costs as little as $1 per week to run—making it both safe and energy efficient.
Specifications
Product Code
SRB4412
Output
90W
Voltage
12V
Number of Bars
7
IP Rating
IP55
Warranty
7 Years
Lead Length
1.5m
Finish
Brushed S/Steel
Dimensions
600×800×122mm
Key Features & Benefits
7-Year Warranty
Backed by a comprehensive 7-year manufacturer warranty for complete peace of mind.
Safe 12V Operation
Low-voltage 12V design with supplied transformer allows installation close to wet areas. Same heat output as 240V rails of equivalent wattage.
Brushed Stainless Steel Finish
Premium brushed stainless steel complements brushed nickel tapware and modern bathroom aesthetics.
Energy Efficient
Rapid heat-up to 45–55°C and costs as little as $1 per week to operate with a timer.
Safe, Efficient & Flexible
- Hardwired operation with flexible wiring positions—left or right side, top or bottom
- IP55 rated for bathroom environments
- Can be wired to standard on/off switch or programmable timer for cost control
- Multiple rails can be wired to a single timer (respecting load ratings)
- Transformer can be installed up to 2 metres away in ceiling or wall cavity
- Mounting points: 600mm vertical, 568mm horizontal spacing
Frequently Asked Questions
How do I control my heated towel rail?
Thermorails are safe to run continuously but most prefer control. Wire to a standard switch or programmable timer to set your schedule and save energy.
Can I wire multiple rails to one timer?
Yes, you can connect multiple rails to a single timer. All rails wired to one timer operate together. Remember: do not exceed the timer’s load rating (typically 1–16 amps), and all 12V units must be wired through their transformers before connecting to the timer.
Do 12V rails get as warm as 240V rails?
Yes. Heat output is determined by wattage, not voltage. A 12V rail with 90W outputs the same heat as a 240V rail rated 90W.
Are 12V rails more efficient than 240V?
No. Both use the same electricity for equivalent wattage. A 12V 90W rail uses the same energy as a 240V 90W rail.
Where should the transformer be installed?
Install the transformer in the ceiling or wall cavity no more than 2 metres from the rail. If in the wall cavity, it must be behind a switch plate for access and requires proper ventilation.
