Description
The VS900HBZ Brushed Bronze Round Vertical Heated Towel Rail is an affordable luxury for bathrooms with limited wall space. This sleek single-bar vertical rail features a round profile with a brushed bronze PVD finish that pairs with bronze tapware. Operating at 12-volt with a supplied transformer, it warms to 50–55°C with a towel draped over it. The optional towel hook lets you hang a towel easily while keeping a clean, modern look.
Specifications
Product Code
VS900HBZ
Output
22W
Voltage
12V
Number of Bars
1
IP Rating
IP55
Warranty
7 Years
Lead Length
2m
Finish
Brushed Bronze PVD
Dimensions
W142×H900×D100mm
Key Features & Benefits
7-Year Warranty
Backed by a 7-year manufacturer warranty for long-term reliability.
Safe 12V Operation
Low-voltage 12V rail with transformer supplied for use anywhere in the bathroom.
Brushed Bronze Round Finish
Round profile with brushed bronze PVD finish complements matching tapware.
Hook Included
Optional towel hook supplied. Heats to 50–55°C with a towel draped over the rail.
Safe, Efficient & Flexible
- Brushed bronze round finish pairs with bronze tapware
- Top or bottom hardwired mounting positions
- IP55 rated for bathroom zones
- Retrofittable to tiled walls where power can be routed to mounts
- Each rail supplied with its own 12V transformer
- Optional towel hook included
- Multiple rails can be spaced about 200mm apart
- Round profile provides a clean, modern detail
Frequently Asked Questions
Can vertical rails be retrofitted to existing walls?
Yes. Vertical rails do not require an in-wall mounting system and are supplied with a transformer and mounts. If your electrician can route power to the mounting points, you can retrofit to existing tiled walls. The 12V transformer is typically installed behind a switch plate or in the roof.
Do 12V rails get as warm as 240V rails?
Yes. Heat output depends on wattage, not voltage. A 12V rail with the same wattage will perform like a 240V rail.
What temperature does the rail reach?
About 35°C without a towel. With a towel draped over the rail, beneath-towel temperature typically reaches 50–55°C.
Do I need a separate transformer for each rail?
Yes. Each vertical rail is supplied with its own 12V transformer. Use one rail per transformer to avoid overload and ensure reliable operation.
Where should the transformer be installed?
Install in the ceiling or wall cavity within 2 metres of the rail. If in the wall cavity, it must be behind a switch plate with ventilation.
What spacing is recommended between multiple rails?
Approximately 200mm apart as a guide. Adjust to preference and allow for any installed hooks.
Can I wire multiple rails to one timer?
Yes. Do not exceed the timer’s load rating. All rails on the same timer operate together. Each rail must connect through its own transformer before the timer.
